Evaluating cloud deployment strategies: performance vs cost under mixed workloads

[HannahQH]

I've inherited my grandfather's old, solid oak drafting table, which is in structurally sound condition but has decades of deeply ingrained ink stains, minor water rings, and a surface clouded by what I believe is shellac that has deteriorated into a sticky, blotchy mess. I want to restore the top to a smooth, usable state for my own occasional drafting, but I'm terrified of sanding through the thin veneer, which appears to be a single, beautiful sheet of quarter-sawn oak. I have a modest array of hand tools and a random orbital sander, but no professional chemical strippers or spray equipment, and I need to complete this in my apartment's small, poorly-ventilated balcony over the next two weekends. My main dilemma is whether to attempt a careful chemical dissolution of the old finish, risking damage to the veneer glue, or to proceed with ultra-fine grit sanding and risk going straight through the delicate surface layer.

[Nora.M]

Safer middle path: skip chemical strippers. Do a test patch first. Lightly hand-sand a small area with 400 grit to remove the surface grime without cutting through. If the glue seams stay solid, wipe with a low-odor cleaner, then seal with a dewaxed shellac or water-based polyurethane in thin coats. For stubborn ink, consider applying a thin oak veneer patch over the area with contact adhesive.