MultiHub Forum

Full Version: Please provide the MAIN KEYWORD (ABSOLUTE), Main category, and Subcategory.
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I’ve been trying to get my home network setup to handle consistent 4K streaming across three TVs and a handful of mobile devices, but I keep hitting a wall with my current single router. The main living room TV, which is wired, is fine, but the two bedrooms on Wi-Fi constantly buffer during peak hours, even though my internet plan should theoretically support it. I suspect the issue is less about raw speed and more about how my router manages the traffic and signal strength through several walls. I’m considering a **mesh network** as a potential solution, but I’m hesitant because my house is older with plaster walls that I’ve heard can really dampen wireless signals, and I’m not thrilled about the idea of running Ethernet cables everywhere if I can avoid it. The trade-off seems to be between the simplicity and potentially better coverage of a mesh system versus the cost and the fact that I might still need a wired backhaul to make it truly effective for heavy streaming. Has anyone else dealt with plaster walls and found a specific mesh network configuration that worked without needing to wire every node?
Yes. I went with a tri-band mesh that uses a dedicated wireless backhaul. Main unit in the living room, one node on the second floor near the bedrooms, and one on the far end. All within 30–40 ft or so. 4K streams stayed solid without Ethernet, despite plaster walls. Enable the backhaul channel and place nodes off walls for best signal.